| AVO BM200 Series
|
Tests insulation at rated voltage into a 1mA load Choice of single or multiple test voltages Automatic discharge of circuit under test The Megger BM220 Series of Analogue/Digital Insulation and Continuity Testers comprises a range of instruments which offers comprehensive test features in a cost effective package. Combining an analogue bar graph display with the simplicity of a clear 3 digit liquid display, the instruments offer a choice of insulation test voltages, with the option of single, dual or triple test voltage instruments. Full rated test voltage is produced when supplying a 1mA load. |
|
|
Simple to operate. Direct readings down to 0,01 provided by 3 1/2 digit L.C.D. Audible indication of test execution The Megger LT5 and LT6 Digital Loop Testers have been designed for quickly, accurately and reliably testing newly established and existing wiring installations. They are simple to use, both with the standard lead for socket tests and with the optional safety leads for performing tests on lighting installations and testing earth bonding. |
|
|
Guaranteed not to trip RCD's, even electronic ones (less than or equal to 30 mA) Tests Phase-Earth and Phase-Neutral supply loops Low current loop test does not trip RCD's Direct readout of Prospective Short Circuit Current and Prospective Earth Fault Current Makes measurements on 110 V and 230 V supplies The MEGGER LT7 Digital Loop Tester is a small hand held instrument designed to accurately, reliably and easily measure Loop Resistances and Prospective Fault Currents at socket outlets, distribution boards and light sockets. The LT7 may also be used for testing earth bonding. Two Loop Tests are available; the traditional high current test for circuits protected by fuses, and a low current test for taking measurements on circuits which are protected by residual current devices (RCD's).
|
| AVO CM500
|
Combines the function of several instruments in one package Non-tripping loop test for tests on RCD protected circuits RCD ramp test features actual tripping current Stores approximately 750 different test results in internal memory The Megger CM500 Multifunction Installation Tester combines all the functions required to fully test domestic, commercial, and industrial fixed wiring, in accordance with international standards. The CM500 is the first installation tester with a non-tripping loop tester guaranteed not to trip any RCD rated 30 mA or above. Its memory and storage capability offers all data to display, download to a PC and on unique on-site print facility.
|
